Steel Laboratory Storage Gas Cylinder Cabinets / Two Gas Cylinder
Cabinet / Compressed Gas Cylinder Cabinets
Specifications of Storage Gas Cabinets:
1. 1.0mm cold rolled steel plate, sheet metal structure blasting
points based on position in Cabinet back, effectively preventing
accident hazard control at the same time to a minimum.
2. Epoxy coating both inside and outside of the Cabinet, acid and
alkali and organic solvent.
3. Using three-point linkage, lock control, increase the impact
resistance of the door.
4. With cable fixation cylinders, stability and superior
5. Using a metal handle. Facilitate the smooth opening.
6. All steel hinges to ensure smooth opening of the door at the
same time in increased firm.
7. Gas cylinders are classified into ordinary type, automatic
|Product name:||Full Steel Gas Cylinder Storage Cabinet|
|Use 1.2mm thick imported cold-rolled steel plate;|
|All the models are formed by punching, bending, welding and
|No matter from the vertical direction or the horizontal direction,
or its corner, the surface is very smooth,|
|the welding point is polished and antirust treating.|
|The door and the board of drawer are also dealing with the same
|advoiding the effect from surface deformed. Moisture and shock
|improving the overall beauty of the products.|
|Door||two layer structure, the iner and outer are antirust and shock
|Glass:||5mm transperant visible glass was paneled in the inner|
|Layer:||cold-rolled steel thickened plate|
|Handle||Brush finished stainless steel handle|
|175 degree wide-opened hinge, rustproof, noiseproof, best strength|
|not easy to breaking, long-lasting life|
|High-quality nylon pad,skidproof and shock absorption|
|Server type:||OEM & ODM|